HomeProduct Center

Product Center

10 Categories · 510 Products

Structured Cabling 7 Series · 66 Products
View All→
Network Cable Series Network cables are mainly made of copper and are divided into shielded and unshielded categories. Core models are matched to different scenarios by performance level, meeting transmission needs from homes to enterprises. Copper cable models and scenarios CAT5e: Supports 1000 Mbps for homes and small offices, connecting computers, routers, printers, etc. CAT6/CAT6A: CAT6 transmits 10 Gbps (within 90 m), and CAT7 up to 100 m, for enterprise equipment rooms and HD surveillance, suited to high-bandwidth devices. Most network cables are used in campus buildings, inter-city branch networks and long-distance in-building cabling, such as connections between IDC equipment rooms and the Internet. 12 Items → Network Modules A network module (information outlet jack) is the core interface component connecting cabling to equipment. It is divided into copper and optical fiber modules to suit different cabling systems. Copper modules such as CAT5e, CAT6 and CAT7 match network cables of the same category to enable data transmission, supporting rates of 1000 Mbps / 10 Gbps. For high-bandwidth, long-distance transmission, common SFP and QSFP optical modules are available. Copper modules are used in wall outlets and patch panels for homes/enterprises to connect computers, switches and other devices, while optical modules are deployed in data centers and campus equipment rooms to connect servers and core switches, meeting high-speed interconnection needs. 7 Items → Network Patch Panels A network patch panel is the core component for centrally managing network cables. It comes in different models by port count and application to suit all kinds of cabling scenarios. Port count classification: Common 24-port and 48-port versions, with a few 12-port versions; 24-port is the mainstream choice for enterprises and equipment rooms. Performance classification: CAT5e, CAT6 and CAT6A grades, matching network cables of the same category and supporting rates from 1000 Mbps to 10 Gbps. Application scenarios: Enterprise equipment rooms / telecom closets - connecting switches to wall outlets for easy management of workstation networks. Data centers: Paired with CAT6A or higher grade, centrally managing high-speed links to servers and storage devices for convenient maintenance. 11 Items → Network Patch Cords Network patch cords are mainly used to connect network devices, enabling signal transmission between devices through standardized interfaces. They also serve core functions such as protecting backbone cables, improving cabling flexibility and complying with international standards. Used to connect core network devices such as servers, switches and routers for high-speed data transmission, they achieve flexible connection between network cables and terminal devices through telecom boxes, patch panels and other structures. 16 Items → Network Faceplates A network faceplate is a cabling product in the work area cabling subsystem used to hold modules and protect the cables at information outlets. Its performance and appearance directly affect the cabling result. It supports installation of various modules and is terminated to the T568B wiring standard. In the future, network faceplates will develop toward higher speed and intelligence, supporting 5G-A and 6G network transmission, adopting fiber-optic faceplates for higher bandwidth, and integrating AI technology for traffic analysis and fault diagnosis. The modular design supports flexible Ethernet configuration, while eco-friendly materials deliver green, energy-saving performance. 8 Items → Telephone Voice System The voice system is used in structured cabling systems for terminating voice cables in telecom closets and equipment rooms. It supports the T568A and T568B wiring standards, with transmission performance exceeding the TIA/EIA-568-B.2 and ISO/IEC 11801 Category 5e requirements, and can simultaneously terminate voice, fax and data services. Its components are made of flame-retardant polycarbonate with nickel-plated phosphor bronze contact terminals, ensuring safety and stable connections. Product specifications cover configurations from 25-pair to 300-pair, suited to installation in 19-inch standard racks, and it is widely used for horizontal cabling and equipment room subsystems in equipment room projects. 12 Items → Cabling Accessories Structured cabling accessories include RJ45 plugs, straight-through couplers, cable managers, cable labels, connectors, cable ties, tags and protective conduits. From survey and design to construction and testing, every step is strictly controlled to achieve efficient integration of information transmission, control and management, ensuring the stability and safety of the cabling system and meeting customers' needs in modern office, living and management environments. 0 Items →
Fiber Optic Cables 6 Series · 59 Products
View All→
Indoor Optical Cables Indoor communication optical cable is specially designed for cabling inside buildings. Its jacket is mostly flame-retardant PVC, meeting indoor fire safety codes, and it is lightweight, soft and easy to bend. It comes in types such as drop cable and indoor bundled cable, with no heavy armoring, making conduit installation convenient. Low-smoke, halogen-free (LSZH) versions are available, producing less smoke and lower toxicity in a fire to protect personal safety. It is mainly used for optical routing in equipment rooms, corridors and offices, connecting patch panels, termination boxes and user outlets to carry broadband and surveillance signals. Its protection rating suits normal indoor ambient environments; it is not suitable for outdoor direct burial or aerial installation. 8 Items → Outdoor Optical Cables Outdoor optical cable is mainly used to connect communication nodes between cities and build backbone networks, supporting the transmission of integrated services such as voice, data and video. For urban access networks, it is buried under sidewalks and green belts to connect base stations, optical distribution boxes and user terminals, typically using 24-fiber or 48-fiber cable to meet the high-speed data transmission needs of 5G base stations, and requires anti-explosion and corrosion resistance. Along railways/highways, it is buried along the track or roadside, adapting to temperature variations, and suits direct burial, with metal armoring or rodent repellent additives protecting it from damage by rodents. 15 Items → Power Optical Cables Power communication optical cable is specially designed for power grid auxiliary communications, and is mainly divided into three types: OPGW (optical ground wire composite cable), ADSS (all-dielectric self-supporting cable) and OPLC (optical phase conductor composite low-voltage cable). Suited to installation on HV transmission lines, it features lightning resistance, strong immunity to electromagnetic interference, and high tensile and compressive strength, with an outer jacket resistant to high and low temperatures and UV degradation. Laid together with transmission towers and poles, it requires no separate cabling and carries power grid dispatch, relay protection and surveillance data. Widely used in substations and HV transmission lines, it is the core transmission medium of the power private network, ensuring safe and stable power grid communications. 6 Items → Hybrid Optical Cables A hybrid optical-electrical composite cable integrates the functions of optical fiber and power conductors, suiting scenarios where data and electrical power must be transmitted simultaneously. The conductors are multi-strand oxygen-free copper wires with a moderate voltage rating, insulated with plastic insulation for safe, stable operation. Fiber count, nominal cross-section and length can all be customized on request. The cable serves as the transmission line in broadband access networks - a new access approach that combines optical fiber and power copper conductors in one cable, solving the problems of broadband access, device power supply and signal transmission at the same time. 10 Items → Vibration Sensing Cables Sensing optical cable has a wide range of applications, mainly for infrastructure monitoring. Through distributed optical fiber sensing technology, it monitors parameters such as temperature and vibration in real time. Transmission lines use sensing cable for long-distance temperature monitoring to ensure stable power transmission. Dedicated oil-well sensing cable withstands temperatures up to 300 °C and is used for downhole temperature and acoustic monitoring. In coal mines, its immunity to electromagnetic interference makes it the preferred solution for underground safety monitoring. For tunnels, roads and airport runways, it prevents accidents through temperature and strain monitoring. 12 Items → Special Optical Cables Special communication optical cable is purpose-built for special operating conditions. Unlike ordinary indoor/outdoor cable, its structure is customized to the application environment. Types include flame-retardant, armored, rodent-resistant, submarine, tactical (field) and low-temperature aerial cable. Through metal armoring, water-blocking compounds and special jackets, it delivers enhanced resistance to pressure, water, gnawing by animals and extreme temperatures. With low-loss fiber units, it can adapt to harsh scenarios such as tunnels, mines, underwater and battlefield conditions. It is mostly used in rail transit, mining, offshore platforms, emergency communications and power engineering, ensuring stable optical signal transmission under extreme conditions. 8 Items →
Fiber Patch Cords 6 Series · 100 Products
View All→
Standard Fiber Patch Cords Indoor standard optical fiber patch cords come in a rich variety of models and can be classified in several ways. By connector type, the common ones include SC, LC, FC and ST. The SC connector has a square profile and is easy to plug and unplug, and is widely used in data centers and structured cabling. The LC connector is compact, suited to high-density cabling scenarios. The FC connector uses a threaded coupling for excellent stability. The ST connector uses a bayonet coupling and was widely used in early fiber-optic networks. 25 Items → Armored Fiber Patch Cords An armored optical fiber patch cord is wrapped with a metal armor layer (such as a stainless steel tube or steel wire braid), which withstands crushing, pulling and impact, and also resists rodent gnawing and corrosion, suiting complex indoor environments. The armor layer reduces external interference and signal attenuation, ensuring stable high-speed data transmission (e.g., 10G/800Gbps). It retains the flexibility of a standard patch cord and can be routed in tight spaces with bends (minimum bend radius 20/10D), while remaining compatible with a variety of installation scenarios. Custom lengths are supported. 19 Items → Multi-Core Fiber Patch Cords Multi-fiber patch cords reduce the number of cables and the space occupied by cable trays in racks, simplify cabling layouts and cut cable management work, making later maintenance and troubleshooting easier. With multiple fiber cores built in, they can transmit multiple signals simultaneously, greatly improving transmission efficiency. 4-, 8-, 12-, 24- and 48-fiber patch cords enable simultaneous transmission of multiple services (data, voice and surveillance), reducing the cost and complexity of inter-building cabling. They suit cabling in tight spaces and are compatible with a variety of indoor environments such as data centers and enterprise campuses. 8 Items → MPO Fiber Patch Cords MPO fiber patch cords are used for high-bandwidth interconnection in high-density data centers, cloud data center backbone links, 5G base station room and data center interconnection, and high-end storage area networks. They connect 40G/100G/400G switches and optical modules (e.g., a QSFP100G optical module paired with a 24-fiber MPO patch cord), and provide centralized connection between server clusters and MPO fiber patch panels. They save substantial rack space - a single 24-fiber MPO patch cord can replace 24 single-fiber LC patch cords - and meet the high-density, high-bandwidth needs of data centers. 20 Items → Fiber Pigtails A fiber pigtail provides the transition between the backbone optical cable and patch cords, and is the core component of the splice-and-patch process for fiber links in equipment rooms. Single-mode pigtails use OS2 9/125 μm fiber, suited to long-distance transmission (1310 nm/1550 nm wavelengths). Mainstream multi-mode pigtails are OM3 50/125 μm (supporting 10 Gbps) and OM4 50/125 μm (supporting 40G/100G). Common connector types include LC, SC, ST and FC. Standard lengths of 0.5 m, 1 m and 2 m are available, and armored versions are also offered. 20 Items → Special Fiber Patch Cords Special optical fiber patch cords include remote fiber, polarization-maintaining fiber, multi-fiber, single-to-multi-mode conversion fiber and aviation-plug fiber, designed specifically for high-reliability applications in industrial and harsh special environments. These patch cords feature a variety of interfaces - LC/SC/ST/FC/MTRJ/APC - in simplex, duplex or multi-fiber connector configurations. They offer excellent crush resistance and high flexibility with armored tubing, and also feature a flame-retardant LSZH outer jacket with high tolerance to chemicals commonly found in industrial environments. They are suitable for both indoor and outdoor industrial installations. 8 Items →
Fiber Accessories 6 Series · 72 Products
View All→
Fiber Couplers An optical fiber coupler is a core passive optical component that requires no power supply. It splits and combines optical signals through evanescent field coupling between fibers, and its ports are bidirectional. The mainstream manufacturing process is fused biconical tapering (FBT), in which multiple fibers are fused and tapered to form a coupling region, with the splitting ratio customized to requirements. Common configurations include 1×2, 2×2 and 1×4. The component features low insertion loss and high isolation, with a compact structure and strong environmental adaptability. It is mainly divided into standard splitting couplers and WDM (wavelength division multiplexing) couplers: the former is used for splitting in PON broadband and CATV networks, while the latter multiplexes and demultiplexes multi-wavelength signals. Widely used in optical fiber communications, fiber-optic sensing, laser equipment and optical power monitoring, it is a fundamental component for optical network expansion and optical path reuse. 16 Items → Fiber Adapter Panels A fiber faceplate, also known as a fiber desktop faceplate or information faceplate, is mostly used at indoor low-voltage outlets together with a fiber termination box. It is mostly made of flame-retardant plastic with a simple appearance, fits standard 86-type mounting boxes and is easy to install. The faceplate is pre-punched with openings for SC and LC fiber adapters, and can accept the incoming drop fiber to bring the optical path out to connect to the optical modem (ONT). An internal fiber slack storage space protects the fiber from bend damage, and the dust cover keeps out dirt. Commonly used at FTTH outlets in homes, offices and shops, it keeps cabling tidy while combining aesthetics and protection, and is an accessory for indoor fiber termination cabling. 20 Items → Fiber Distribution Frame An optical fiber patch panel is the standard rack-mount patching equipment for equipment rooms, mostly 19-inch rack-mount type with a rugged and durable metal housing. Internally equipped with splice trays, adapter mounting slots and cable routing rings, it can perform cable fixing, fusion splicing, optical path patching and storage of spare fiber slack. Supporting SC, LC and other fiber connector types, it is available in 12-, 24-, 48- and 96-fiber versions and can centrally manage multiple backbone fibers for flexible circuit patching and routing. With the advantages of low insertion loss and easy maintenance, it is widely used in telecom equipment rooms, data centers and enterprise low-voltage telecom racks to keep fiber routes organized and facilitate expansion and troubleshooting. It is the core patching device for optical links in equipment rooms. 0 Items → Fiber Splice Closure Optical fiber splice closures come in mainstream designs categorized by installation method and are primarily used to splice and protect optical cables, suiting a variety of outdoor scenarios. Main types Horizontal (dome-type) splice closure: Compact and easy to install, suitable for splicing aerial and duct optical cables. Vertical (in-line) splice closure: Large capacity and strong protection, mostly used in complex environments such as direct burial and submarine installations. Pole-mounted splice closure: Can be fixed directly onto utility poles, suited to mid-span splicing of aerial optical cables. Application scenarios Splicing of telecom operators' backbone and access network optical cables, such as connecting cable breaks between cities or within campuses. Outdoor optical cable systems such as security surveillance and traffic signal networks, protecting splices from wind, rain and corrosion. 12 Items → Fiber Distribution Boxes An optical fiber distribution box is the core passive distribution device in an ODN network. It comes in two types: indoor wall-mounted and outdoor waterproof. The enclosure is made of SMC or cold-rolled steel with dust-proof, moisture-proof and anti-aging protection. Internally it integrates a splice tray, adapters, fiber slack storage and a splitter mounting position, and can perform cable fixing and grounding, fusion splice protection, pigtail storage and optical path distribution and routing, keeping fiber routing orderly and avoiding bend loss. Common capacities range from 12 to 144 fibers, suiting PON FTTH, residential corridor, base station and campus telecom closet applications. An optical splitter can be built in for multi-branch splitting. It simplifies optical link operation and maintenance and makes line expansion and fault repair convenient, serving as the key transfer node from the backbone cable to user terminals. It is widely used in broadband communications, security surveillance and industrial optical transmission scenarios. 12 Items → SMC Fiber Distribution Boxes SMC optical fiber distribution closures are available in various models and specifications, such as Pujin's SUN-OCC-96SMC, SUN-OCC-144SMC, SUN-OCC-288SMC, SUN-OCC-576SMC and SUN-OCC-1152SMC, with fiber counts from 96 to 1152. Installation methods include wall mounting, pole mounting and ground/pedestal mounting. They are mainly used for the connection, scheduling and distribution between backbone optical cables and distribution cables at optical branching points, suiting outdoor environments such as community green belts, building sides and utility poles. 12 Items →
Large Pair Count Cables 5 Series · 20 Products
View All→
Indoor Large Pair Cables Indoor multi-pair telephone cable: types HYV, HYSVP, HPYV, HPYV22, etc. In the type code, H stands for local (urban) telecommunication cable, J for crosslinked polyethylene (XLPE) insulation, V for PVC jacket, and VP for copper wire braid shielding. Typical parameters: nominal conductor diameter 0.4-0.6 mm, commonly 10-2000 pairs; DC resistance of the 0.5 mm conductor ≤ 95 Ω/km at 20 °C; insulation resistance ≥ 1000 MΩ·km; operating temperature -20 °C to +60 °C. The cable suits office buildings and data centers, and can be used for vertical riser cabling, horizontal floor communication links and equipment interconnection in equipment rooms, supporting voice and low-speed data transmission. It suits installation in indoor cable trays and conduits. 4 Items → Outdoor Large Pair Cables The core models of outdoor multi-pair cable include HYA, HYAT, HYAC and HYAT53. In the type code, H stands for local (urban) telecommunication cable, Y for polyethylene insulation, A for aluminum-plastic sheath, T for petroleum jelly (flooding compound) filling, C for self-supporting construction, and 53 for steel tape armor. Conductor diameter is 0.4-0.9 mm with 5-3000 pairs; at 20 °C, resistance of the 0.4 mm conductor is ≤ 148 Ω/km and insulation resistance ≥ 3000 MΩ·km, with an operating temperature of -30 °C to +60 °C. The cable suits urban backbone communication networks, township and rural lines, and outdoor campus cabling. It supports direct burial, aerial and duct installation, and is suited to voice and low-speed data transmission in complex outdoor environments. 4 Items → Filled Large Pair Cables Flooded (jelly-filled) multi-pair cable types: HYAT, HYAT23, HYAT53, etc. The petroleum jelly filling fills the internal gaps of the cable to form an airtight, moisture-sealed barrier that keeps out water and dampness. Typical parameters: conductor diameter 0.4-0.9 mm; at 20 °C, conductor resistance ≤ 95 Ω/km (0.5 mm²) and insulation resistance ≥ 3000 MΩ·km; operating temperature -30 °C to +60 °C. The cable is mainly used in communication networks such as urban telephone lines and LAN cabling, and is also suitable for industrial scenarios such as coal mines and power utilities. It can be installed in ducts, by direct burial or aerially. 4 Items → Direct-Buried Pair Cables Outdoor direct-burial multi-pair cable: in types WDZB-HYA22, HYA23, HYA53, HYAT22, HYAT23 and HYAT53, H stands for local (urban) telecommunication cable, Y for polyethylene insulation, A for aluminum-plastic composite sheath, and 53 for steel-plastic tape armored PE jacket. Conductor diameter is 0.32-0.8 mm with 10-1000 pairs; at 20 °C, DC resistance of the 0.5 mm conductor is ≤ 95 Ω/km and insulation resistance ≥ 10000 MΩ·km, with an operating temperature of -30 °C to +60 °C. The cable suits telecommunications lines with demanding crush resistance requirements, and can be directly buried, installed aerially or in ducts. It is especially suitable for harsh environments prone to mechanical damage and corrosion. 4 Items → Self-Supporting Pair Cables Self-supporting multi-pair cable: HYAC and HYYC. The self-supporting design embeds multi-strand galvanized steel wire as a messenger inside the cable, allowing aerial installation without additional support and simplifying construction. In the type code, H stands for local (urban) telecommunication cable, Y for polyethylene insulation, A for aluminum-plastic composite sheath, and C for self-supporting construction. Conductor diameter is available in various sizes such as 0.4-0.9 mm; at 20 °C, DC resistance of the 0.5 mm² conductor is ≤ 95 Ω/km and insulation resistance ≥ 3000 MΩ·km, with an operating temperature of -30 °C to +60 °C. The cable is mainly used for communication backbones in towns and villages, cabling in large parks and campuses, and urban-rural fringe areas, and is suited to aerial installation. 4 Items →
Robot Cables 5 Series · 35 Products
View All→
Sensor Cables CPE building cable uses chlorinated polyethylene as the insulation/jacket material and is the core cable for low-voltage building scenarios. Its key characteristics and applications are as follows. In terms of characteristics, **flame retardance with low smoke and low toxicity** is the key: it meets Class A flame retardance per GB/T 19666, producing little smoke and low toxic gas when burning, and suits venues such as hospitals and schools. **Excellent environmental resistance**: moisture resistance allows use in basements and pool areas, and it withstands -40 °C to +125 °C, suiting both northern and southern climates. It also features a small bend radius (only 6-8 times the outer diameter) and strong insulation (volume resistivity ≥ 10¹⁴ Ω·cm), and meets environmental standards. Applications focus on three scenarios: low-voltage building power distribution (residential lighting, garage charging piles), fire safety (emergency lighting and alarm device wiring) and low-voltage auxiliary systems (security surveillance cable), precisely matching building safety and construction needs. 8 Items → PU Reeling Cables PU reel cable uses polyurethane (PU) as the jacket/insulation material, suiting mobile equipment that requires frequent paying out and rewinding. Its key characteristics and applications are as follows. In terms of characteristics, **outstanding high-frequency flexing performance**: flex life of over one million cycles, bend radius of only 5-7 times the cable outer diameter, and resistance to repeated reeling/unreeling without breaking. **Excellent environmental resistance**: oil and grease resistance and acid/alkali resistance suit industrial oily scenarios, and elasticity is maintained across -40 °C to +80 °C without brittle cracking at low temperatures. It also offers high tear resistance and wear resistance to withstand drag friction. Applications focus on power supply to mobile equipment: reel power supply for cranes and stackers, drag chain reels on automated production lines, and cables for heavy mobile machinery at ports and mines, ensuring continuous, stable power supply while equipment moves, suited to complex industrial working conditions. 8 Items → TPE Flexible Cables TPE flexible cable uses thermoplastic elastomer (TPE) as the insulation/jacket, combining rubber-like elasticity with the easy processability of plastics. Its key characteristics and applications are as follows. In terms of characteristics, **high flexibility is the core**: bend radius of only 5-7 times the cable outer diameter, dynamic flex life of over ten thousand cycles, suiting high-frequency motion scenarios. Wide temperature range (-40 °C to +105 °C): no brittle cracking at low temperatures and no deformation at high temperatures. It also resists oil, grease, acids and alkalis, achieves halogen-free flame retardance to UL94 V-0, and complies with the RoHS environmental standard. Applications span multiple fields: industrial automation (robot joints, machine tool drag chains), medical equipment (patient monitor cables supporting sterilization), new energy (charging pile cables) and consumer electronics (fast-charging phone cables). It adapts to complex working conditions and is gradually replacing traditional PVC cables. 8 Items → XLPE PV Cables XLPE photovoltaic cable uses radiation-crosslinked polyolefin as the insulation/jacket and is designed specifically for PV systems. Its key characteristics and applications are as follows. In terms of characteristics, **extremely strong weather resistance**: resistant to UV, salt spray and damp heat, passing 3000-hour aging tests with a service life of ≥ 25 years. Stable temperature performance (-40 °C to +90 °C, short-term tolerance to 125 °C, and 200 °C for 5 seconds under short-circuit conditions). Bend radius of only 4 times the outer diameter, volume resistivity ≥ 10¹⁴ Ω·cm, low smoke and halogen-free, flame retardant to UL94 V-0, and RoHS compliant. Applications focus on the PV chain: DC interconnection between modules and between modules and combiner boxes, and transmission from combiner boxes to inverters. It suits centralized power plants, distributed rooftop systems and PV-plus-storage systems, complies with IEC 62930 and UL4703 standards, and is the core cable for green energy transmission. 8 Items → FEP Teflon Cables FEP/PFA high-temperature cable uses fluoroplastic as the insulation/jacket and belongs to the high-end special cable category. Its characteristics and applications focus on extreme environment requirements. In terms of characteristics, **outstanding temperature resistance**: FEP withstands -80 °C to +200 °C continuously, PFA up to -80 °C to +260 °C, and both can briefly tolerate 300 °C, remaining stable in extreme cold and heat. **Extremely strong chemical inertness**: resistant to strong acids, strong alkalis, aqua regia and organic solvents. It is also flame retardant to UL94 V-0, with extremely low dielectric loss, and insulation performance is unaffected by temperature or frequency. PFA offers better mechanical strength and creep resistance, while FEP offers higher cost-effectiveness. Applications focus on high-end fields: semiconductor equipment wiring, 5G base station RF cables, aerospace extreme-environment cables, chemical anti-corrosion monitoring cables and sterile medical equipment wiring, suiting demanding conditions such as high temperature, strong corrosion and high-frequency transmission. 3 Items →
Special Cables 5 Series · 36 Products
View All→
High-Temperature Cables A high-temperature cable is a special cable that operates stably for long periods in high-temperature environments. Its key characteristics and applications focus on demanding temperature scenarios. In terms of characteristics, **temperature resistance is the core**: continuous operating temperature of -60 °C to +260 °C, with special types (such as silicone rubber or fluoroplastic insulation) reaching 400 °C; the insulation layer does not soften at high temperatures and electrical performance remains stable. It also combines weather resistance (UV and salt spray resistance) with corrosion resistance (acid, alkali and oil resistance), achieves flame retardance to UL94 V-0, and has high mechanical strength without becoming brittle. Applications focus on high-temperature working conditions: industry (power supply for metallurgical kilns and glass production lines), new energy (wiring in high-temperature areas of PV inverters and energy storage systems), aerospace (cables around engines) and chemical plants (monitoring cables for high-temperature reactors), ensuring continuous power supply and signal transmission for equipment under extreme heat. 8 Items → LSZH Cables Low-smoke, halogen-free (LSZH) cable uses halogen-free flame-retardant material as the insulation/jacket, and its core advantage centers on safety plus environmental friendliness. Its characteristics and applications are as follows. In terms of characteristics, **low smoke and low toxicity are the key**: when burning, smoke light transmittance ≥ 80% does not block visibility, and toxic gases such as hydrogen chloride released are ≤ 5 mg/g, reducing harm to people. Environmentally friendly and halogen-free: contains no halogens such as chlorine or bromine, complies with RoHS/REACH standards, and leaves no pollutants after disposal. It is also flame retardant to UL94 V-0, with good weather resistance against UV and damp heat, and mechanical strength that meets cabling needs. Applications focus on high-safety scenarios: enclosed transit spaces such as subways and high-speed rail, crowded venues such as hospitals and shopping malls, critical facilities such as data centers and equipment rooms, plus renewable power stations and green buildings, meeting the dual requirements of safety and environmental friendliness. 8 Items → Ultra-Flexible Cables Ultra-flexible cable uses multiple fine copper wires as conductors with TPE/TPU insulation, and its core advantage is extreme flexibility. Its characteristics and applications are as follows. In terms of characteristics, **extremely strong flexibility**: bend radius ≤ 5 times the cable outer diameter, dynamic flex life of over one million cycles, and resistance to repeated folding and twisting without breaking. Wide temperature adaptability (-40 °C to +105 °C): not brittle at low temperatures and not stiff at high temperatures. It also combines wear resistance and tear resistance to withstand frequent dragging, is halogen-free and environmentally friendly in compliance with RoHS, and some types support sterilization. Applications focus on high-frequency motion and tight spaces: industry (robot joints, machine tool drag chains), medical equipment (minimally invasive surgical instruments, portable patient monitors), consumer electronics (VR devices, foldable phone flex cables) and precision cabling on automated production lines, ensuring stable power supply and signal transmission in dynamic scenarios. 8 Items → Torsion-Resistant Cables A torsion-resistant cable is designed specifically for high-frequency twisting scenarios, and its core advantage is resistance to torsional fatigue. Its characteristics and applications are as follows. In terms of characteristics, **outstanding torsion resistance**: with stranded conductors of fine copper wires plus a spiral-wrapped construction, it achieves a twist life of over one million cycles (e.g., repeated ±360° twisting) without the conductors and insulation layer breaking during twisting. Flexible adaptation: bend radius ≤ 5 times the outer diameter, covering twisting and bending requirements simultaneously. Temperature range -40 °C to +105 °C, wear and tear resistant, with the insulation layer maintaining stable electrical performance during twisting. Mostly made of halogen-free, environmentally friendly materials in compliance with RoHS. Applications focus on dynamic twisting scenarios: industrial robots (power supply for multi-joint rotation), automation equipment (rotary worktable cables), surgical robots (twisting cable routing in robotic arms) and construction machinery (rotary arm connections), ensuring continuous power supply and signal transmission under frequent twisting. 8 Items → CPR Flame-Retardant Cables CPR flame-retardant cable refers to cable that complies with the EU Construction Products Regulation (CPR 305/2011/EU) and EN 50575, and its core advantage is precisely graded fire safety performance. In terms of characteristics, cables are classified into seven classes from Aca to Fca according to heat release and flame spread rate. Class Aca is nearly non-combustible with extremely limited flame propagation. It also features low smoke and low toxicity, with smoke density and acidic gas emissions meeting EN 61034-2 and EN 60754-2, and restricted halogen content. It also provides basic mechanical strength and insulation stability, suiting fixed building wiring needs. Applications focus on high-safety scenarios: Class Aca is used in nuclear power plants and core areas of data centers; B1ca/B2ca classes suit crowded buildings such as shopping malls and hospitals; Class Cca and below are used in ordinary residential and industrial premises. CPR compliance is also a mandatory requirement for market access of building cable in the EU. 4 Items →
RF Coaxial 5 Series · 48 Products
View All→
RF Coaxial Feeders An RF coaxial feeder cable is the main transmission cable for base stations and RF systems. It features an inner conductor, foamed insulation, double shielding and an outer jacket, with a standard impedance of 50 Ω. Compared with RF patch cords, it has a thicker diameter and lower transmission loss, making it suitable for long-distance signal transmission. The shielding layer resists external electromagnetic interference, and the waterproof, corrosion-resistant jacket suits outdoor installation. N-type RF connectors are fitted at both ends to connect base station equipment to antennas for delivering high-power RF signals. Widely used in mobile communication base stations, rail transit and private wireless networks, it is the core cable for long-distance outdoor RF signal transmission. 6 Items → Leaky Coaxial Cables Leaky coaxial cable, also known as radiating cable (leaky feeder), features regularly spaced slots on its outer conductor, allowing it to radiate electromagnetic waves uniformly while transmitting RF signals and to receive external signals at the same time. It is mostly 50 Ω impedance with a wear-resistant, waterproof outer jacket, and offers good shielding and signal radiation performance. It is commonly used in signal-blocked areas such as tunnels, subways and underground parking garages to fill the coverage blind spots of ordinary antennas. Simple to install, it can be laid continuously along a passage to provide seamless wireless coverage, and is often used with base stations, two-way radios and rail transit communication systems to reliably guarantee wireless communication in long, narrow enclosed spaces. 6 Items → RF Connector Assemblies An RF connection assembly consists of RF connectors, coaxial cable and adapter accessories. Common connector types include SMA, N and BNC, and cable impedance is mostly 50 Ω. A double-shielded construction reduces signal loss and electromagnetic interference, suiting high-frequency RF signal transmission. Length and connector type can be customized on request, for equipment interconnection, signal transition and line extension. It includes patch cords, adapters, terminations, attenuators and other accessories, and is flexible to assemble and easy to install and dismantle. Widely used in mobile communication base stations, wireless equipment, microwave testing and security RF systems, it ensures stable RF link connections and facilitates equipment debugging, line expansion and maintenance. 16 Items → RF Coaxial Jumpers An RF coaxial patch cord is a dedicated connecting cable for RF systems. It consists of an inner conductor, insulation layer, outer shielding and jacket, with N, SMA, BNC or other RF connectors fitted at both ends. The shielding reduces signal leakage and external interference while transmitting high-frequency RF signals, with impedance mostly 50 Ω. The cable is soft, easy to bend and low-loss, suiting base stations, wireless APs and surveillance RF equipment. It is mainly used for short-distance signal transition between devices to interconnect antennas, power amplifiers and RF modules, facilitating equipment debugging and cabling adjustments. It is widely used in mobile communications, wireless communications, security RF and microwave testing scenarios. 16 Items → Multi-Core Coaxial Cables Multi-core coaxial cable integrates multiple independent coaxial units within a single jacket. Each core is equipped with its own inner conductor, insulation layer and shielding, so the cores do not interfere with each other, and the whole assembly is protected by an outer jacket. Standard impedance is mostly 50 Ω or 75 Ω, with strong immunity to electromagnetic interference, and it can transmit multiple RF signals simultaneously. The compact structure keeps cabling tidy, eliminating the mess of laying multiple individual coaxial cables separately. It is commonly used for RF equipment in equipment rooms, surveillance, base station signal transmission and instrument testing, supporting parallel transmission of multiple video and RF signals for convenient centralized cabling and line management. 4 Items →
Drag Chain Cables 4 Series · 26 Products
View All→
High-Speed Drag Chain Cables As its name suggests, a drag chain cable is a special cable designed for use with drag chain (energy chain) systems and engineered for high-frequency dynamic motion. It is not simply an upgraded version of ordinary cable; rather, from structural design and material selection to performance parameters, it is a cable type developed around the core requirement of withstanding repeated bending, dragging and torsional mechanical stress, aimed at solving the problems of ordinary cables being easily damaged and having a short service life in dynamic environments. 8 Items → Medium-Speed Drag Chain Cables The conductors of drag chain cables use a bundle-stranding plus re-stranding process with multiple ultra-fine copper wires (for example, a single conductor is made by stranding dozens or even hundreds of fine copper wires each under 0.1 mm, and then multiple such bundles are stranded together again). This structure disperses bending stress to the maximum, so the conductors do not break easily even under repeated flexing. Some high-end products also tin-plate the conductor surface for enhanced oxidation resistance. 8 Items → PUR Drag Chain Cables PUR (polyurethane) or TPU (thermoplastic polyurethane) offers three major advantages. First, wear resistance far exceeding that of PVC (5-10 times that of ordinary PVC), withstanding friction inside the drag chain channel and crushing by equipment. Second, strong tear resistance - even if scratched by sharp objects, the damage does not spread easily. Third, resistance to oil, chemicals and extreme temperatures (adapting to environments from -40 °C to +105 °C), enabling stable operation in complex scenarios such as industrial oil contamination, outdoor rain and snow, and high-temperature workshops. 8 Items → Cold-Resistant Drag Cables A TPU cable is a high-performance flexible cable with a thermoplastic polyurethane (TPU) jacket, offering softness, wear resistance, oil resistance, cold resistance, tear resistance and corrosion resistance, making it an ideal cabling solution for many harsh environments. TPU cables are widely used in automation equipment, drag chain systems, robots, outdoor engineering, industrial control, medical machinery, mobile equipment and similar applications. 2 Items →
DAC/AOC/SFP 6 Series · 48 Products
View All→
1/10/25G SFP+/SFP28 An Active Optical Cable (AOC) is a communication cable that converts between optical and electrical signals using external power. It integrates optoelectronic conversion chips at both ends, organically combining optical fiber with cable to achieve long-distance, high-speed data transmission. Compared with traditional cables, AOCs offer lower power consumption, lower signal attenuation, higher bandwidth and immunity to electromagnetic interference, and are widely used in data centers, HD video transmission and other applications. 8 Items → 40/50/56G SFP56/QSFP The 56G QSFP+ passive copper high-speed cable (1 m, passive, 56G QSFP+, 30AWG), a compatible QSFP+ high-speed cable, uses passive copper construction and requires no additional power to ensure a high-quality connection. It complies with IEEE 802.3ba and SFF-8436 MSA standards. It provides a cost-effective short-range interconnection between telecom operator or data center equipment, achieving speeds of up to 56G in LAN or SAN applications. 8 Items → 100G DSFP/SFP112 The QSFP-4SFP25G-CU1M, a compatible QSFP28-to-4x25G SFP28 direct attach cable, uses passive copper cable technology to achieve a reliable connection without additional power. The cable provides a cost-effective solution for short-range device interconnection in telecom operator equipment rooms or data centers, enabling seamless connection between a 100G QSFP28 port and four 25G SFP28 ports, and complies with industry standards such as IEEE 802.3bj, SFF-8402 and SFF-8665. 8 Items → 200G QSFP56 The universally compatible QSFP-DD-to-2x100G QSFP28 high-speed cable uses passive copper transmission and requires no additional power to ensure a high-quality connection. This breakout cable complies with IEEE 802.3bj, SFF-8679 and SFF-8636 standards. It connects a 200G QSFP-DD port at one end to two 100G QSFP28 ports at the other, providing a cost-effective short-range interconnection in scenarios such as telecom operator equipment rooms and data centers. 8 Items → 400G OSFP/QSFP112 The QSFP-DD pluggable solution enables 400G transmission and fully complies with SFF-8679, QSFP-DD MSA, IEEE 802.3bj and IEEE 802.3cd standards. The QSFP-DD-to-2xQSFP56 cable assembly is a high-performance, high-bandwidth and cost-effective interconnect solution that supports 400G standard applications at various data rates. 8 Items → 800G OSFP/QSFP The 800G OSFP/QSFP-DD passive copper high-speed cable is designed specifically for 800G Ethernet, providing an OSFP copper direct-attach solution. This breakout cable complies with the OSFP MSA and IEEE 802.3ck standards. This easy-to-install, high-speed, cost-effective cable is used for short-distance connections within a data center rack or between adjacent racks. 8 Items →